electromechanical earthquake valves

Return

جهت مشاهده قیمت محصول لطفا شماره موبايل خود را وارد نماييد

جهت خرید لطفا شماره موبايل خود را وارد نماييد

electromechanical earthquake valves

electromechanical earthquake valves

sismik

In electromechanical earthquake-sensitive valves, an electronic box containing sensors, control and steering system is added to the electric valves

Size: "1" to "8" (inches)

Working pressure: up to 60 pounds

Systematic electromechanical valves are produced in two types

NOFIRE

These types of earthquake-sensitive valves work both mechanically and electrically

This milk is produced according to the TSE TS 12884 standard. Apart from the earthquake pulse sensor, the device can be connected to various sensors such as fire sensor, smoke, gas warning devices, etc. It also connects emergency door sensors, automatic door entry and exit doors, elevators and stairs, and can also control them when they are in danger

This device can cut or cut off the power

Generators can also be disconnected or controlled with this device

Technical Specifications 

Working voltage: 170 / 250VAC 50Hz

Preparation: 30mA

Battery capacity: 12VDC / 2.2Ah

Time to charge the battery: 24 hours

Battery status: Automatically activated if power is interrupted

Working environment temperature: 0 ile + 51.5º C arası

Battery Warning Voltage: 11.85 VDC / ± 5%

Dimensions: 185mm * 180mm * 90mm

Weight: 2.7 Kg

SISCUT

These types of earthquake-sensitive valves work only electrically and without human intervention. They are very precise and intelligent, and they are sensitive to specific pulses of vibration, according to the settings

This milk is produced according to the TSE TS 12884 standard and automatically sends natural gas by sending a 12V signal to the gas valves (electronic valves) on the main natural gas feed pipe. The signal can be sent to the point at the time of the earthquake and to prevent the flow of gas from the fire and explosion

Technical Specifications 

Working voltage: 170 / 250VAC 50Hz

Preparation: 30Ma

Battery capacity: 12VDC / 2.2Ah

Battery charge time: 24 saat

Battery status: Automatically activated if power is interrupted

Working environment temperature: 0 ile + 51.5º C arası

Work connection thickness: (2x0,75mm2 TTR Kablo) -max.20m

Battery Warning Voltage: 11.85 VDC/ ± 5%

Dimensions: 185mm * 180mm * 90mm

Weight: 2.7 Kg

tip 

These lids are manufactured according to the TSE TS 12884 standard

Apart from the earthquake pulse sensor, the device can be connected to various sensors such as fire sensor, smoke, gas warning devices, etc. It also connects emergency door sensors, automatic door entry and exit doors, elevators and stairs, and can also control them when they are in danger

This device can cut or cut off the power

Generators can also be disconnected or controlled with this device

 

Share with your friend via the telegram

Post your question here

To get the latest news from the company, sign up for our newsletter